You are here

DALGAKIRANLARDA BLOK AĞIRLIKLARININ BELİRLENMESİ ÜZERİNE YAPILAN ÇALIŞMALARIN İNCELENMESİ

EXEMINATION OF THE FORMULAS OF ARMOUR UNIT WEIGHT AT RUBBLE MOUND BREAKWATERS

Journal Name:

Publication Year:

Author NameUniversity of AuthorFaculty of Author
Abstract (2. Language): 
Rubble mound breakwaters are constructed in shoreline (in coastal area). Determination of armour unit weight is very important for structure stability. The effect of dynamic wave is very complex on these type structures. Then determination of their effects as complete is very difficult. In this study, developed some empirical formulas in different countries in last years are compered and for different criterias armour unit weight are obtained and the result of effects these unit weight are investigated.
Abstract (Original Language): 
Kıyılarda inşa edilen taş dolgu dalgakıranlar, dinamik dalga etkilerine, koruyucu tabakasında kullanılan bloklar ağırlıkları ile karşı koyarlar. Bu nedenle koruyucu tabaka blok ağırlığının belirlenmesi yapı stabilitesi için çok büyük önem arz eder. Bü tür yapılar üzerinde dinamik dalga hareketi çok karmaşık olduğundan, oluşturacağı etkilerin tam olarak belirlenebilmesi çok zordur. Konuyla ilgili laboratuar model çalışmaları devam etmektedir. Bu çalışmada, son yıllarda çeşitli ülkelerde yapılan ve geliştirilen bazı ampirik formüller karşılaştırmalı olarak incelenmiş ve blok ağırlıklarının belirlemesinde farklı kriterlerin sonuca etkileri incelenmiştir.
35-48

REFERENCES

References: 

Ahrens, J. P. and Mc Cartney, B. L. (1975): “Wave Period Effect on the Stability of Riprap,
Proc. Civil Engineering in the Ocean III, 1975, Vol. 2, pp. 1019-1034.
Bilgin, R., Ertaş, B. (1986): “Doğu Karadeniz Sahil Tahkimat Projesi”, Ara Rapor No: 1 ve
2, KTÜ İnşaat Mühendisliği Bölümü Hidrolik Laboratuarı, Trabzon, 1986.
Bruun, P. (1979): Command Reasons for Damage or Breakdown of Mound Breakwaters,
Coastal Engineering, Vol. 2, 1979, pp.261-273.
Bruun, P. (1985): “Design and Construction of Mounds for Breakwaters and Coastal
Protection”, Elsevier, 1985
Heder, P. A. (1986): “Armour Layer Stability of Rubble-Mound Breakwaters”, Journal of
Waterway, Port, Coastal, and Ocean Engineering, Vol. 112, No. 3, pp. 334-350, May
1986.
Hudson, R.Y. (1958): “Design and Quarry-Stone Cover Layer for Rubble-Mound
Breakwaters”, U.S. Waterways Experiment Station, research Report No. 2-2, Vicksburg,
Miss.,.
Hudson, R.Y. (1959): “Laboratory Investigation of Rubble Mound Breakwaters”, Proc. Am.
Soc. Civil Engineers, Journal Waterways, Harbors, and Coastal Engineering Division,
ASCE 85, WW3, pp. 93-121, 1959.
Iribarren, C. R. (1965): “Formule Poule Calcul des Diques en Enrochements Natuels ou
Elements Artificiels”, XXI International Navigation Congress, Stockholm, Section II-1,
1965.
Kapdaşlı S. (1992): “Kıyı Mühendisliği”, T.C. İTÜ Matbaası, İstanbul.
Losada, M. A. ve Ginemez-Curto, L. A. (1979): “The Joint Effect of Wave Height and Period
on the Stability or Rubble Mound Breakwaters Using Iribarren’s Number”, Coastal
Engineering, Vol. 3, 1979a.
Pianc (1980), Report by ^th Wave Commission, Supplement to Bulletion No. 36, Vol. II,
Brussels, Belgium, 1980, pp. 1021-1027.
Sawagari, T. (1966): Scouring Due to Wave Action at the Toe of Permeable Coastal
Structure, Proceeding of the 10th Conference on Coastal Engineering, Printed by the
ASCE, Japan, 1966, pp. 736-743.
Spm (1984): “Shore Protection Manual”, CERC, Vol. II.
Spm (1987): “Shore Protection Manual”, CERC, Vol. II.
Turan, M. U. (1990): Taş Dolgu Kıyı Koruma Yapı Tiplerinin Belirlenmesi ve Stabilitelerinin
Tayini, Yüksek Lisans Tezi, KTÜ Fen Bilimleri Enstitüsü, 1990, Trabzon.
Turan, M. U. (1995): Palyeli Altermnatif Dalgakıranların Proje Kriterlerinin Belirlenmesi ve
Stabilitesinin Araştırılması, Doktora Tezi, KTÜ Fen Bilimleri Enstitüsü, 1995, Trabzon.
Van der Meer, J. W. (1987): “Stability of Breakwater Armour Layers-Design Formula”,
Journal of Coastal Engineering, Amsterdam, The Noterlands, 11, pp. 219-239, 1987.

Thank you for copying data from http://www.arastirmax.com