Effects of Diode and Er,Cr: YSGG Laser Used in Periodontal
Treatment on the Surface Roughness of Various Prosthetic
Dental Materials
Journal Name:
- Akdeniz Tıp Dergisi
Keywords (Original Language):
Author Name | University of Author | Faculty of Author |
---|---|---|
Abstract (2. Language):
Objective: The aim of this study was to evaluate the effects of the Er,Cr:YSGG laser and diode laser,
used in periodontal surgery, on the surface roughness of various restorative materials.
Material and Methods: Three different restorative materials were used in this study. Resin Block,
Zirconium Block and Veneering Ceramic. Thirty cylindrical samples (8 mm diameter, 2 mm height)
were prepared for each restorative material. The samples were assigned to 3 experimental groups
(n=10). Group 1: no surface treatment (control group); Group 2: Er, Cr: YSGG laser (Waterlase iPlus,
Biolase, Irvine, CA) application at settings of 1.5 W with 35 Hz laser irradiation for 20 sn; and Group
3: 810 nm diode laser (Epici Biolase, Irvine, CA) application at a setting of 1 W with continuous
phase laser irradiation for 20 s. After laser irradiation, roughness of the sample surfaces was measured
using a profilometer. Data were analyzed using 1-way ANO VA and Tukey’s Post Hoc test. Scanning
electron microscopy (SEM ) analyses were performed to evaluate the surface deformations of the
restorative materials.Results: Resin block was the most affected material following the application of the laser. There was a significant difference the between
control group and laser irradiation group. Er,Cr:YSGG laser was more effective than diode laser. Although laser treatment increased
the surface roughness of porcelain, there was no significant difference between the laser-treated groups. Laser-treated zirconium groups
were significantly different compared to each other but there was no significant difference between the control group and the laser
groups.
Bookmark/Search this post with
Abstract (Original Language):
Amaç: Bu çalışmanın amacı periodontal cerrahide kullanılan Er,Cr:YSGG ve diode lazerin çeşitli
restoratif materyaller üzerine etkilerini incelemekti.
Gereç ve Yöntemler: Araştırma kapsamında üç farklı restoratif materyal kullanıldı. Bunlar rezin
blok, zirkon blok, ve porselen. Her materyalden 30 adet (8 mm çapında, 2 mm kalınlığında) silindirik
örnekler hazırlandı. Örnekler 10 diskten oluşan üç gruba ayrıldı. 1. Gruptaki örneklere; herhangi bir
yüzey işlemi yapılmadı(kontrol grubu). 2. Gruptaki örneklere; Er,Cr:YSGG lazer (Waterlase iPlus, Biolase,
Irvine, CA) 20 sn 30Hz frekans ile 1.5 W güç kullanarak uygulandı. 3. Gruptaki örneklere; 810
nm dalga boyuna sahip diode lazer (Epici Biolase, Irvine, CA) 20 sn 1 W güç kullanılarak uygulandı.
lazer uygulandıktan sonra, örnekler yüzey pürüzlülüğü profilometre kullanılarak ölçüldü. Elde edilen
veriler tek yönlü ANO VA ve Tukey’in Post Hoc testi kullanılarak analiz edilmiştir. Yüzey deformasyonu
incelemek için SEM analizi uygulandı.
Bulgular: Rezin blok lazer uygulamasında en çok etkilenen materyal oldu. Kontrol grubu ile lazer
uygulanmış gruplar arasında belirgin fark vardı. Er,Cr:YSGG lazer diode lazere göre daha etkili
oldu. Porselen gruplarında lazer uygulaması yüzey pürüzlülüğünü arttırmış olmasına rağmen lazer
uygulanmış gruplar arasında belirgin bir fark yoktu. Lazer uygulanmış zirkon gruplar arasında fark
olmasına rağmen her iki lazer grubunun kontrol grubu ile anlamlı bir fark bulunamadı.
Sonuç: Er,Cr:YSGG lazerin restoratif materyaller üzerine etkili olduğu görüldü.
FULL TEXT (PDF):
- 1