The Design of Infrared Optical MODEM
Journal Name:
- Uludağ Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Key Words:
Keywords (Original Language):
| Author Name | University of Author | Faculty of Author |
|---|---|---|
Abstract (2. Language):
In this study, an infrared optical MODEM circuit has been designed to use in data
communication in the free space. Designed circuit consists of a transmitter and a receiver. The data which
has been sent by the transmitter modulates an infrared LED’s light. A photodiode which is connected as
photoconductive mode has been used as photo detector at the receiver end. The LED has been driven with
pulsed high current to increase communication distance. The data pulses must be modulated in suitable
way for driving LED with high current pulses. Suitable modulation (and demodulation) technique has
been designed for this in here. Two short pulses which consist of two different pulse duration have been
generated at the rising and falling edges of the data pulses during the modulation process and these short
pulses have been demodulated in suitable way at the receiver. The structure of each part of modem circuit
which designed here has been examined and how the modem is working has been explained by drawing
some signals relative to each other which are observed from certain nodes of circuit.
Bookmark/Search this post with
Abstract (Original Language):
Bu çalışmada serbest uzayda veri iletişiminde kullanılmak üzere bir kızılötesi optik MODEM
devresi tasarlanmaktadır. Tasarlanan devre bir verici ve bir alıcı kısımdan oluşmaktadır. MODEM’in
verici kısmından gönderilen veriler bir kızılötesi LED’in ışığını modüle etmektedir. Alıcı uçta ise
fotodedektör olarak fotoiletken modunda çalışan bir fotodiyot kullanılmıştır. Vericideki LED, iletişim
uzaklığını arttırmak için darbeli yüksek akımla sürülmektedir. LED’i darbeli yüksek akımla sürebilmek
için veri darbelerinin uygun şekilde modüle edilmesi gerekmektedir. Burada bunun için uygun
modülasyon (ve demodülasyon) tekniği tasarlanmaktadır. Modülasyon işlemi esnasında veri darbelerinin
yükselen ve düşen kenarlarında iki farklı kısa süreli darbe üretilmektedir ve bunlar alıcıda uygun şekilde
demodüle edilmektedir. Burada tasarımı yapılan modemi oluşturan her bir devre yapısı tek tek ele alınıp
incelenmekte ve modemin nasıl çalıştığı devrenin belirli noktalarında oluşan işaretler birbirine bağlı
olarak çizilerek açıklanmaktadır.
FULL TEXT (PDF):
- 1
121-129