Buradasınız

TERMOPLASTİK MATRİSLİ TABAKALI KOMPOZİT PLAKTA ELASTİK-PLASTİK GERİLME ANALİZİ

ELASTO-PLASTIC STRESS ANALYSIS OF THERMOPLASTIC MATRIX COMPOSITE LAMINATED PLATES UNDER IN-PLANE LOADING

Journal Name:

Publication Year:

Abstract (2. Language): 
Metal lif takviyeli termoplastik matrisli tabakalı kompozit plaklar sıcak pres metoduyla imal edilmiştir. Simetrik ve anti-simetrik tabakalı kompozit plaklar kendi düzlemine paralel yüklere maruzdur. Elastik-plastik sayısal çözüm bazı yük adımları için sonlu elemanlar yöntemiyle (SEM) gerçekleştirilmiştir. Plaklardaki artık gerilmeler ve plastik bölgeler tablolar halinde verilmiş ve şekillerle gösterilmiştir.
Abstract (Original Language): 
Thermoplastic matrix reinforced with metal fiber, composite laminated plates were manufactured by using moulds. The symmetric and antisymmetric laminated plates were loaded by in-plane forces. An elastic-plastic numerical solution has been carried out by finite element technique (FEM) for some load steps. Residual stresses and expansion of plastic zone have been illustrated in tables and figures.
1017
1023

REFERENCES

References: 

Alexander, A. and Tzeng, J. T. 1997. Three Dimensional Effective Properties of Composite
Bahei-El-Din, Y., Dvorak, G. and Utku, S. 1981.
Finite Element Analysis of Elasto-Plastic Fibrous Composite Structures. Computers & Structures. 13,
321-330.
Bathe, K. J. 1982. Finite Element Procedures in Engineering Analysis. Prentice-Hall, Inc., Englewood Cliffs, New Jersey.
Chen, A. W. L., Miyase A., Geil, P. H. and Wang, S. S. 1993. Anelastic Deformation of a Thermoplastic-Matrix Fiber Composite at Elevated Temperature; Part I: Neat Resin Structure Characterization, Journal of Composite Materials. 27, 862-884 .
Chou, P. C., McNamer, B. M. and Chou, D. K.
1973. The Criterion of Laminated Media. Journal of Composite Materials. 7, 22-35.
Hartness, J. T. 1980. "Polyphenylene Sulfide Matrix Composites" The 25th National SAMPE Symposium, The 1980's Payoff Decade for Advanced Materials, 25, 376-388 .
Hartness, J. T. 1982. "Polyetheretherketone Matrix Composites" The 14th National SAMPE Technical Conference, Materials and Process Advances' 82,
14, 26-37.
Hartness, J. T. 1984. "An Evaluation of Polyetheretherketone Matrix Composites Fabricated from Unidirectional Prepreg Tape" The 29th National SAMPE Symposium, Technology Vector, 29, 459-47.
Hergenrother, P. M., Jensen, B. J. and Havens, S. J. 1984. "Thermoplastic Composite Matrices with Improved Solvent Resistance" The 29th National SAMPE Symposium, Technology Vector, pp.
1060-1072 .
Mühendislik Bilimleri Dergisi 1999 5 (2-3) 1017-1023
1022
Journal of Engineering Sciences 1999 5 (2-3) 1017-1023
Elasto-Plastic Stress Analysis of Thermoplastic Matrix Composite Laminated Plates A. Yapıcı, N. Tarakçıoğlu, A. Akdemir, A. Avcı
Hoggatt, J. T. 1973. "Reinforced Structural Composites Using Thermoplastic Matrices" The 5th National SAMPE Technical Conference, Materials and Process for the 70's Cost Effectiveness and Reliability, 5, 91-102.
Hoggatt, J. T. 1975. "Thermoplastic Resin
Composite" The 20th National SAMPE
Symposium, Technology in Transition, 20, 606¬617 .
Jeronimidis, G. and A. T. Parkyn. Residual Stresses in Carbon Fiber-Thermoplastic Matrix Laminates. Journal of Composite Materials. V .22, 5.
Jong, T. 1981. Stress Around Rectangular Holes in Orthotropic Plates. Journal of Composite Materials. 15, 311-328.
Karakuzu,
R.
, Sayman, O., Gökkuş, Ü. and Çalışkan, A. 1990. A Study of the Stress Analysis of Two Combined-Material Pulleys by Using the Finite Element Method. Modeling, Simulation and
Control, B, AMSE. 30, 7-15.
Karakuzu, R. and Sayman, O. 1991. "Increasing the Limit of Angular Velocity by Residual Stresses on Rotating Discs with Holes" Proc. Int. AMSE Conf. Modeling and Simulation, 3, 3-10.
Karakuzu, R. and Sayman, O. 1991a. Elasto-plastic Finite Element Analysis of Orthotropic Rotating Discs with Holes. Computers & Structures. 51, 695¬703.
Karakuzu,
R.
, Özel A. and Sayman, O. 1997. Elasto-plastic Finite Element Analysis of Metal Matrix Plates with Edge Notches. Computers & Structures.
63, 551-558.
Lin, C. C., and Kuo, C. C. 1989. Buckling of Laminated Plates with Holes. Journal of Composite Materials, 23, 536-553.
Muzzy, J. D. and Kays, A. O. 1984. Thermoplastics vs. Thermosetting Structural Composites. Polymer Composites. 5, 169-172 .
Okur, A., Sayman, O.
an
d Karakuzu, R. 1993. Stress Concentrations at Axially Loaded Projections of Composite Flat Plates. Modeling, Simulation and
Control, B, AMSE. 49, 57-63.
Rigby, R. B. 1982. "High Temperature Thermoplastic Matrices for Advanced Composites"
The 27th National SAMPE Symposium, Materials
Overview, 37, 747-752 .
Tsai, S. W. and Wu, E. M. 1971. A General Theory of Strength for Anisotropic Materials. Journal of Composite Materials. 5, 58-79.
Toparlı,
M
. and Aksoy, T. 1991. "Calculation of Residual Stress in Cylindrical Steel Bars Quenched
in water from 6000C" Proc. Int. AMSE Conf., Signal Data and Systems, 4, 93-104.

Thank you for copying data from http://www.arastirmax.com