Arora, N., & Kumar, D. (1997). Availability analysis of steam and power generation
system in thermal power plant. Micro electron Reliability, 37(5), 95-99.
doi:10.3926/jiem.2009.v2n2.p387-406 ©© JIEM, 2009 – 2(2): 387-406 - ISSN: 2013-0953
Simulation modeling and analysis of a complex system of a thermal power plant 403
S. Gupta; P. C. Tewari
Balaguruswamy, E. (1984). Reliability engineering. New Delhi: Tata McGraw Hill.
Barabady, J., & Kumar, U. (2007). Availability allocation through importance
measures. International Journal of Quality and Reliability Management, 24(6),
643-657.
Barabady, J., & Kumar, U. (2008). Reliability analysis of mining equipment: a case
study of a crushing. Reliability Engineering and System Safety, 93, 647–653.
Beounes, C. et al. (1993). SURF-2: A program for dependability evaluation of
complex hardware and software systems. Paper presented at 23rd int. symp. on
fault-tolerant computing. Toulouse, France.
Bernson, S., de Souza e Silva, E., & Muntz, R. (1991). A methodology for the
specification of markov models. In Stewart, W. (Ed.), Numerical solution to
markov chains (pp 11–37). Boston, MA: Kluwer.
Blischke, W. R., & Murthy, D. N. P. (2003). Case Studies in Reliability and
Maintenance. USA: Wiley.
Butler, R. (1986). The SURE reliability analysis program. Paper presented at the
AIAA guidance, navigation and control conference, Williamsburg, VA.
Ciardo, G., Muppala, J., & Trivedi, K. (1989). SPNP: Stochastic Petri Net Package.
Paper presented at the 3rd Int. Workshop on petri nets and performance models,
Kyoto, Japan.
Dhillon, B. S. (1983). Reliability engineering in systems design and operation. New
York: Van Nostrand-Reinhold.
Ebling, C. E. (1997). An Introduction to reliability and maintainability Engineering.
New Delhi: TMH Publishing Company Limited.
Gupta, S., Tewari, P. C., & Sharma, A. K. (2008a). Performance modeling and
decision support system of feed water unit of a thermal power plant. South
African Journal of Industrial Engineering, 19(2), 125-134.
Gupta, S., Tewari, P. C., & Sharma, A. K. (2008b). Reliability and availability
analysis of ash handling unit of a steam thermal power plant - part1. International
journal of Engineering research and industrial applications, 1(V), 53-62.
doi:10.3926/jiem.2009.v2n2.p387-406 ©© JIEM, 2009 – 2(2): 387-406 - ISSN: 2013-0953
Simulation modeling and analysis of a complex system of a thermal power plant 404
S. Gupta; P. C. Tewari
Gupta, S., Tewari, P. C., & Sharma, A. K. (2009a). Availability simulation model
and performance analysis of coal handling unit a typical thermal power plant.
South African Journal of Industrial Engineering, 20(1), 159-171.
Gupta, S., Tewari, P. C., & Sharma, A. K. (2009b). Reliability and availability
analysis of ash handling unit of a steam thermal power plant. South African
Journal of Industrial Engineering, 20(1), 147-158.
Johnson, Jr. A.M., & Malek, M. (1988). Survey of software tools for evaluating
reliability, availability and serviceability. ACM Computing Surveys, 20(4), 227–
269.
Khanduja, R., Tewari, P. C., & Kumar, D. (2008). Availability analysis of bleaching
system of paper plant. Journal of Industrial Engineering, Udyog Pragati, N.I.T.I.E.
Mumbai (India), 32(1), 24-29.
Koren, J. M., & Gaertner, J. (1987). CAFTA: a fault tree analysis tool designed for
PSA. Paper presented at the Probabilistic safety assessment and risk
management: PSA, Zurich, Switzerland.
Krishnamurthi, G., Gupta, A., & Somani, A.K. (1996). The HIMAP modeling
environment. Paper presented at the 9th International conference on parallel and
distributed computing systems: Dijon, France.
Kumar, D., & Pandey, P. C. (1993). Maintenance planning and resource allocation in
urea fertilizer plant. Quality and reliability Engineering International Journal, 9,
411-423.
Kumar, S., Kumar, D., & Mehta, N. P. (1996). Behavioral analysis of shell
gasification and carbon recovery process in urea fertilizer plant. Microelectron
Reliability, 36 (5), 671-673.
Kumar, S., Kumar, D., & Mehta, N. P. (1999). Maintenance management for
ammonia synthesis system in a urea fertilizer plant. International Journal of
Management and System (IJOMAS), 15(3), 211-214
Kumar, S., Kumar, D., & Mehta, N. P. (2000). Probabilistic analysis of
desulphurization system in urea fertilizer plant. Journal of Institution of Engineers
(India), 80, 135-139
doi:10.3926/jiem.2009.v2n2.p387-406 ©© JIEM, 2009 – 2(2): 387-406 - ISSN: 2013-0953
Simulation modeling and analysis of a complex system of a thermal power plant 405
S. Gupta; P. C. Tewari
Kumar, S., Tewari, P. C., & Kumar, S. (2007). Performance modeling and simulated
availability of shell gasification and carbon recovery system of urea plant. Paper
presented at the 16th IASTED International Conference held, Spain.
Kumar, S., Tewari, P. C., & Sharma, R. (2007). Simulated availability of Co2 cooling
system in a fertilizer plant. Industrial Engineering Journal (Indian Institution of
Industrial Engineering, Mumbai), 36(10), 19-23.
Kurien, K. C. (1988). Reliability and availability analysis of repairable system using
discrete event simulation. Ph. D. thesis, IIT, New Delhi.
Lim, T. J., & Chang, H. K. (2000). Analysis of system reliability with dependent
repair models. IEEE Trans Reliab, 49(2), 153–62.
Malhotra, M., & Trivedi, K. S. (1994). Power-hierarchy of dependability-model
types. IEEE Transactions on Reliabilit, 43(3), 493–502.
Raje, D. V., Olaniya, R. S., Wakhare, P. D., & Deshpande, A. W. (2000). Availability
assessment of a two-unit stand-by pumping system. Reliability Engineering and
System Safety, 68, 269–274.
Sahner, R. A., & Trivedi, K. S. (1987). Reliability modeling using SHARPE. IEEE
Trans Reliability, 36 (2), 186–193.
Sanders, W. H., & Obal II, W. D. (1993). Dependability evaluation using UltraSAN.
Paper presented at the twenty-third international symposium on fault-tolerant
computing.
Somani, A. K., Sharma, T., & Nguyen, P. H. (1994). Reliability computation of
systems with latent-failures and monitoring. Paper presented at the 1994 annual
reliability and maintainability symposium.
Srinath, L. S. (1994). Reliability Engineering. 3rd edition, New Delhi, India. East-
West Press Pvt. Ltd.
Wolstenholme, L. C. (1999). Reliability modeling–a statistical approach. Chapman &
Hall; CRC.
Thank you for copying data from http://www.arastirmax.com