You are here

Home » Content

OPTIMIZATION OF LOCATION AND SIZE VALUE OF DGs IN POWER NETWORK USING BEE’S ALGORITHM

Journal Name:

  • Cumhuriyet Üniversitesi Fen Fakültesi Fen Bilimleri Dergisi

Publication Year:

  • 2015

Key Words:

Author NameUniversity of Author
Abstract (2. Language): 
Distributed generators or DGs are new technology that emerged in last decades. These technologies can place close to final consumer and therefore reduce the power loss in all networks. The most problem in DG placement is that these units must be located in optimum locations. The problem of optimum placement of DG units in network is nonlinear and complicated optimization problem. Thus powerful and robust optimization algorithm is needed to solve this problem. In last year’s numerous nature based optimization algorithm have been proposed. Bee’s algorithm or BA is one of the most new and rapid of these algorithms. This optimization algorithm is based on behavior of honey bee in nature. In the propose method BA is used to find the optimum location and size of DG units in power network. This procedure led to efficient power network with good profile voltage and low real power loss. The proposed system is tested on real standard IEEE system and obtained computer simulation results show that the introduced method has excellent performance and can enhance the power quality in power network. All programming of proposed method is done in MATLAB software.
Bookmark/Search this post with
FULL TEXT (PDF): 
PDF icon 5000129505-5000209232-1-pb.pdf
  • 6
51
57
  • Turkish

REFERENCES

References: 

[1] Sreejith, S., Sishaj P., & Simon, M.P. (2015). “Selvan. Analysis of FACTS Devices on Security
Constrained Unit Commitment Problem”. International Journal of Electrical Power & Energy
Systems, 66(3): 280-293.
[2] Gasperic, S., & Mihalic, R. (2015). “The Impact of Serial Controllable FACTS Devices on Voltage
Stability. International Journal of Electrical Power & Energy Systems”. 64(3): 1040-1048.
[3] Valle, D., Araujo, P.B. (2015). “The Influence of GUPFC FACTS Device on Small Signal Stability
of the Electrical Power Systems”. International Journal of Electrical Power & Energy Systems, 65(3):
299-306.
[4] Dash, P., Chandra Saikia, L,.& Sinha, N. (2015). “Comparison of Performances of Several FACTS
Devices Using Cuckoo Search Algorithm Optimized 2DOF Controllers in Multi-Area AGC”.
International Journal of Electrical Power & Energy Systems, 65(2): 316-324.
[5] Pratap Singh, R., Mukherjee, V.,& Ghoshal, S.P. (2015). “Particle Swarm Optimization With an Aging
Leader and Challengers Algorithm for Optimal Power Flow Problem With FACTS Devices”.
International Journal of Electrical Power & Energy Systems, 64(3):1185-1196.
[6] Ravi, K.,& Rajaram, M. (2013). “Optimal Location of FACTS Devices Using Improved Particle
Swarm Optimization”. International Journal of Electrical Power & Energy Systems, 9(4):333-338.
[7] Bhattacharyya, B.,& Gupta, V.K(2014). “Fuzzy Based Evolutionary Algorithm for Reactive Power
Optimization With FACTS Devices”. International Journal of Electrical Power & Energy Systems,
61(2):39-47.
[8] Preetha Roselyn, J., Devaraj, D.,& Subhransu, S. (2014). “Multi-Objective Genetic Algorithm for
Voltage Stability Enhancement Using Rescheduling and FACTS Devices”. Ain Shams Engineering
Journal, 5(3):789-801.
[9] Ghorbani, A., Mozafari, B., Soleymani, S.,& Ranjbar, A.M. (2015). “Operation of Synchronous
Generator LOE Protection in the Presence of Shunt-FACTS”. Electric Power Systems
Research,119(7):178-186.
[10] Duong, T., JianGang, Y.,& Truong, V. (2014). “Application of Min Cut Algorithm for Optimal
Location of FACTS Devices Considering System Loadability and Cost of Installation”. International
Journal of Electrical Power & Energy Systems, 63(4): 979-987.
[11] Esmaili, M., Shayanfar, H.A.,& Moslemi, R. (2014). “Locating Series FACTS Devices for Multi-
Objective Congestion Management Improving Voltage and Transient Stability”. European Journal of
Operational Research, 236(2):763-773.
[12] Chang, R.W.,& Saha, T.K. (2014). “A novel MIQCP Method for FACTS Allocation in Complex Real-
World Grids”. International Journal of Electrical Power & Energy Systems, 62(7):735-743.
[13] Yousefi, A., Nguyen T.T., Zareipour, H.,& Malik, O.P. (2012). “Congestion Management Using
Demand Response and FACTS Devices”. International Journal of Electrical Power & Energy
Systems, 37(1):78-85.
[14] Srithorn, P.,& Theejanthuek, N. (2014). “The Enhanced Performance SVC for Transient Instability
Oscillation Damping”. International Journal of Energy Procedia, 56(2): 510-517.
[15] Singh, A.R.,& Dambhare,S. (2013). “Adaptive Distance Protection of Transmission Line in Presence
of SVC”. International Journal of Electrical Power & Energy Systems, 53(3):78-84.
Optimization of Location and Size Value Of Dgs In Power Network Using Bee’s Algorithm
57
[16] Gabbar, H.A., & Abdelazeem, A. (2014). “Abdelsalam. Microgrid Energy Management in Grid-
Connected and Islanding Modes Based on SVC”. Energy Conversion and Management, 86(1): 964-
972.
[17] Yong Wan, Y., Zhao, J.,& Dimirovski, G. (2014). “Robust Adaptive Control for a Single-Machine
Infinite-Bus Power System With an SVC”. Control Engineering Practice, 30(7): 132-139.
[18] Huang, J.S., Jiang, Z.H.,& Negnevitsky, M. (2013). “Loadability of Power Systems and Optimal SVC
Placement”. International Journal of Electrical Power & Energy Systems, 45(1):167-174.
[19] Ghorbani, A., Khederzadeh, M.,& Mozafari, B. (2012). “Impact of SVC on the Protection of
Transmission Lines”. International Journal of Electrical Power & Energy Systems, 42(1): 702-709.
[20] Dutta, S., Kumar Roy, P.,& Nandi, D. (2015). “Optimal Location of UPFC Controller in Transmission
Network Using Hybrid Chemical Reaction Optimization Algorithm”. International Journal of
Electrical Power & Energy Systems, 64(2):194-211.
[21] Dubey, R., Samantaray, S.R., Panigrahi, B.K.,& Venkoparao, G.V. (2015). “Adaptive Distance Relay
Setting for Parallel Transmission Network Connecting Wind Farms and UPFC”. International Journal
of Electrical Power & Energy Systems, 65(4):113-123.
[22] Sarker, J.,& Goswami, S.K. (2014). “Solution of Multiple UPFC Placement Problems Using
Gravitational Search Algorithm”. International Journal of Electrical Power & Energy Systems, 55(3):
531-541.
[23] Singh, A.R., Patne, N.R.,& Kale, V.S. (2015). “Adaptive Distance Protection Setting in Presence of
Mid-Point STATCOM Using Synchronized Measurement”. International Journal of Electrical Power
& Energy Systems, 67(2):252-260.
[24] Bansilal, S. (2015). “Artificial Neural Network for Coordinated Control of STATCOM, Generator
Excitation and Tap Changing Transformer”. International Journal of Electrical Power & Energy
Systems, 64(2):536-541.
[25] Tarafdar Hagh, M., Sharifian, M.B.B.,& Galvani, S. (2014). “Impact of SSSC and STATCOM on
Power System Predictability”. International Journal of Electrical Power & Energy Systems,
56(2):159-167.
[26] Laouer, M., Mekkaoui, A.,& Younes, M. (2014). “STATCOM and Capacitor Banks in a Fixed-Speed
Wind Farm”. Energy Procedia, 50(7):882-892.
[27] Rajabioun, R. (2011). Cuckoo Optimization Algorithm. Applied Soft Computing: MIT; 11: 5508–
5518.
[28] Dorigo, M.,& Stutzle, T. (2004). Ant Colony Optimization, MIT Press, Cambridge: MIT, 172-180.
[29] Tuba, G.,& Hocaoglu, H. (2009). “An Analytical Method for the Sizing and Sifting of Distributed
Generators in Radial Systems”. Electric Power System Research, 79(2):912–918.

Thank you for copying data from http://www.arastirmax.com