LINEAR ELASTIC CALCULATION OF STEEL FRAMES WITH BAND WINDOWS AND FULL INFILL WALLS UNDER LATERAL MONOTONIC LOADING
Journal Name:
- Gazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi
Keywords (Original Language):
| Author Name | University of Author | Faculty of Author |
|---|---|---|
Abstract (2. Language):
In this study, infill walls, which are commonly used nowadays, were examined using linear elastic method to investigate the positive and negative effects on steel frame systems under lateral loads. The most common models in structural applications were reviewed, and structural steel and gas concrete were selected for the load resisting frame system and the infill material respectively. The purpose of this study is to show that infill walls have advantages and disadvantages not only under the collapse load, but also under service loading. An equivalent diagonal compression bar model was used for the elastic analysis of infill walls in two-story, two-bay planar frames under lateral loads; and a total number of seven models were analyzed for the combinations of steel frames with, without, and partial infill walls. The strength calculations of the equivalent diagonal compression bar were based on the mechanical and geometric properties of the gas concrete. Effects of symmetrically and asymmetrically placed infill walls on the lateral displacement, rigidity, and natural vibration period of the frame were investigated as well as short column and soft story behaviors. The structures were modeled and analyzed using the SAP2000 structural analysis program.
Bookmark/Search this post with
Abstract (Original Language):
Bu çalışmada, günümüzde çok yaygın kullanım alanına sahip, dolgu duvarların yanal yükler altında, çelik çerçeve sistem üzerindeki olumlu ve olumsuz etkileri lineer elastik yöntem ile araştırılmıştır. Yapısal uygulamalarda sıkça görülen modellere dikkat çekilip, çerçeve taşıyıcı elemanları çelik, dolgu malzemesi de gazbeton olarak seçilmiştir. Amaç, dolgu duvarların sadece sistemin göçme yükünde değil, normal işletme yüklerinde de olumlu ve olumsuz katkılar sağladığını göstermektir. İki katlı ve iki açıklıklı düzlem çerçevelerde, yatay yükler altında dolgu duvarlar için eşdeğer basınç çubuğu modeli kullanılmış, çelik çerçevelerin dolgu duvarlı, dolgu duvarsız ve bant pencereli kombinasyonları olmak üzere toplam 7 adet modelin elastik analizi yapılmıştır. Eşdeğer diyagonal basınç çubuğunun dayanım hesapları, gaz betonun mekanik ve geometrik özelliklerine bağlı olarak yapılmıştır. Yapılan kabuller doğrultusunda çerçevede simetrik ve asimetrik yerleştirilen dolgu duvarların, çerçevenin yatay yer değiştirmesine, rijitliğine ve doğal titreşim periyoduna etkileri ile kısa kolon ve yumuşak kat oluşumundaki davranışları incelenmiştir. Analiz ve modellerin yapılmasında SAP2000 strüktürel analiz programı kullanılmıştır.
FULL TEXT (PDF):
- 3